SediPipe 800 / 800 plus
SediPipe 800 and SediPipe 800 plus are stormwater treatment systems for polluted stormwater runoff, e.g., from traffic areas. The systems separate washed-up particles and light liquids (oil) from stormwater and reliably retain these materials in the system, even in case of spills in dry weather.
e.g. SediPipe 800/12
e.g. Sedipipe 800/12
SediPipe 800 and SediPipe 800 plus systems feature a start segment, a target segment and, depending on the size, additional sedimentation pipes. The inlet is 360 degrees rotatable. The inlet and outlet diameter is DN/OD 400. Smaller diameters can be achieved using conventional KG reducers. The flow direction can be adjusted to a desired angle between 90° and 270° on site. The system can therefore be easily adapted to on-site requirements. The total length of the sedimentation path depends on the system type and varies between 12 m and 48 m. The sedimentation path features a construction-related gradient when installed.
SediPipe 800 and SediPipe 800 plus are stormwater treatment systems which keep a permanent water level. Coarse particles are already retained in the first section of the start segment. Fine particles are retained in the sedimentation path. The lower flow separator prevents remobilisation and therefore discharge of sediment also during heavy rain. Systems of the SediPipe 800 plus type additionally feature an upper flow separator leading to increased separation performance for light liquids in rainfall events.